Comment by Bernd Bausch for This is ml2 configuration for controler node:...
The agent creates the bridges and makes all connections on the compute host. If you change the config without restarting it, it’s understandable that your new settings have no effect. Compare the old...
View ArticleComment by Sideris for This is ml2 configuration for controler node:...
After i new test, i restart linux-bridge-agent on controleur when the service is up on compute node, and now it's work. I don't really know why.
View ArticleComment by Sideris for This is ml2 configuration for controler node:...
But nothing happened next ...
View ArticleComment by Sideris for This is ml2 configuration for controler node:...
I make TCPDUMP, on all interfaces. in the compute node, the interface (tapbe445cff-21) is the interface where the instance is plug. I see the DHCP answer: 12:26:40.380376 IP 0.0.0.0.bootpc >...
View ArticleComment by Sideris for This is ml2 configuration for controler node:...
I try to put vxlan network on the second interface and i have the same problem.
View ArticleComment by Bernd Bausch for This is ml2 configuration for controler node:...
You can run OpenStack on a single interface, but the difference in the configuration of the two hosts is a bad omen.
View ArticleComment by Sideris for This is ml2 configuration for controler node:...
Yes i saw this difference but I tried the both solution and it doesn't work. The first time I install my openstack it worka , and configure bridge and vxlan on one interface. But I can ping both in the...
View ArticleComment by Bernd Bausch for This is ml2 configuration for controler node:...
https://docs.openstack.org/install-guide/environment-networking.html: The install tutorial expects the provider interface (green) and the interface for VXLAN traffic (red) to be different. In your...
View ArticleComment by Bernd Bausch for This is ml2 configuration for controler node:...
The two enp6s0 interfaces should have IP addresses of 192.168.10.20 and ...21 before Neutron gets configured. In your cloud, the controller’s address is on one of the bridges, the compute node’s is on...
View ArticleComment by Bernd Bausch for This is ml2 configuration for controler node:...
I don’t know how the Linuxbridge mech driver sets up the various bridges and connections, but it is strange that enp6s0 is plugged in one of the bridges on the controller, whereas it is not on the...
View ArticleComment by Sideris for This is ml2 configuration for controler node:...
So i install a compute service on my controler, and it's worked The problem come from the compute node, i don't know how debug this; Someone can help me plz
View ArticleComment by Sideris for This is ml2 configuration for controler node:...
Is it normal if my namespace dhcp can't ping my compute node ? but can ping my controler node which is in the same network of my compute?
View ArticleComment by Sideris for This is ml2 configuration for controler node:...
Is the configuration of my bridge on my compute node is good ? I follow the same documentation last month, and it was work, today not. Thx
View ArticleComment by Sideris for This is ml2 configuration for controler node:...
I'm not an expert of TCPDUMP I record on bridge controler, bridge compute, interface of router namespace and interface of dhcp namespace. I see the DHCP request going to dhcp namespace, and i see the...
View ArticleComment by Sideris for This is ml2 configuration for controler node:...
Ok i found a solution for configure network interface for the instance, i use virsh. I configure instance. My private network is 172.16.1.0/24, i've got a router with 2 interfaces 192.168.10.102 and...
View ArticleComment by Bernd Bausch for This is ml2 configuration for controler node:...
You seem to have no problems using tcpdump :) Find out where the packets disappear between instance and router.
View ArticleComment by Sideris for This is ml2 configuration for controler node:...
Neutron agent are UP and enable too
View ArticleComment by eblock for This is ml2 configuration for controler node:...
You only mention nova agents, what about neutron? `openstack network agent list`
View ArticleComment by Sideris for This is ml2 configuration for controler node:...
Do you have a tips for change cirros keyboard ? after this i will try to configure network on my instance and try to communicate over the network. Regards, Thx
View ArticleComment by Sideris for This is ml2 configuration for controler node:...
Hi, First thanks for all propositions All nova agents are UP and Enable My Openstack infrastructure run on physical architecture, and use KVM For my test i use cirros 0.4 image, but when i use vnc to...
View Article
More Pages to Explore .....